描述 Description

The PCA9674 and PCA9674A provides general purpose remote I/O expansion via the two-line bidirectional I2C?bus (serial clock (SCL), serial data (SDA)).
The devices consist of eight quasi-bidirectional ports, 1?MHz I2C?bus Fast-mode Plus(Fm+) family interface, with high speed data transfer it can support PWM dimming ofLEDs, and higher I2C?bus drive 30 mA for more devices can be on the bus without theneed for bus buffers. Three hardware address inputs and interrupt output operatingbetween 2.3?V and 5.5?V. The quasi-bidirectional port can be independently assigned asan input to monitor interrupt status or keypads, or as an output to activate indicatordevices such as LEDs. The system master can read from the input port or write to theoutput port through a single register.
The low current consumption of 4.5?μA (typical, static) is great for mobile applications andthe latched output ports have 25?mA high current sink drive capability for directly drivingLEDs.
The PCA9674 and PCA9674A are identical except for the different, non-overlapping slaveaddress. The three hardware selectable address pins can be decode to 64 addresses forthe PCA9674 and 62 addresses for the PCA9674A, so there can be up to 126 of these I/Oexpanders PCA9674/74A together on the same I2C?bus without the need for bus buffers,supporting up to 1008 I/Os (for example, 1008 LEDs).
The active LOW open-drain interrupt output (INT) can be connected to the interrupt logicof the microcontroller and is activated when any input state differs from its correspondinginput port register state. It is used to indicate to the microcontroller that an input state haschanged and the device needs to be interrogated without the microcontroller continuouslypolling the input register via the I2C?bus.
The internal Power-On Reset (POR) initializes the I/Os as inputs with a weak internalpull-up 100?μA current source.

特性 Features

I2C-bus to parallel port expander
1 MHz I2C-bus interface (Fast-mode Plus I2C?bus)
SDA with 30?mA sink capability for 4000?pF buses
Operating supply voltage 2.3?V to 5.5?V with 5.5?V tolerant I/Os held to VDD with 100?μA current source
8-bit remote I/O pins that default to inputs at power-up
Latched outputs with 25 mA sink capability for directly driving LEDs
Total package sink capability of 200 mA
Active LOW open-drain interrupt output
Sixty-four programmable slave addresses using 3 address pins (PCA9674A - sixty-two)
Readable device ID (manufacturer, device type, and revision)
Low standby current (4.5?μA typical)
-40 °C to +85 °C operation
ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101
Latch-up testing is done to JEDEC standard JESD78 which exceeds 100 mA
Packages offered: SO16, TSSOP16, HVQFN16

應(yīng)用 Application

LED signs and displays
Servers
Key pads
Industrial control
Medical equipment
PLCs
Cellular telephones
Mobile devices
Gaming machines
Instrumentation and test measurement