描述 Description

DESCRIPTION
The Philips microcontrollers described in this data sheet are high-performance static 80C51 designs. They are manufactured in an advanced CMOS process and contain a non-volatile Flash program memory that is programmable in parallel (via a parallel programmer) or In-System Programmable (ISP) via boot loader. They support both 12-clock and 6-clock operation.FEATURES
?80C51 Central Processing Unit
–64 kbytes Flash
–512 bytes RAM (P89C60X2)
–1024 bytes RAM (P89C61X2)
–Boolean processor
–Fully static operation
?In-System Programmable (ISP) Flash memory
?12-clock operation with selectable 6-clock operation (via software or via parallel programmer)
?Memory addressing capability
–Up to 64 kbytes ROM and 64 kbytes RAM
?Power control modes:
–Clock can be stopped and resumed
–Idle mode
–Power-down mode
?Two speed ranges
–0 to 20 MHz with 6-clock operation
–0 to 33 MHz with 12-clock operation
?LQFP, PLCC, and DIP packages
?Dual Data Pointers
?Three security bits
?Four interrupt priority levels
?Six interrupt sources
?Four 8-bit I/O ports
?Full-duplex enhanced UART
–Framing error detection
–Automatic address recognition
?Three 16-bit timers/counters T0, T1 (standard 80C51) and additional T2 (capture and compare)
?Programmable clock-out pin
?Watchdog timer
?Asynchronous port reset
?Low EMI (inhibit ALE, 6-clock mode)
?Wake-up from Power Down by an external interrupt

特性 Features

?80C51 Central Processing Unit
–64 kbytes Flash
–512 bytes RAM (P89C60X2)
–1024 bytes RAM (P89C61X2)
–Boolean processor
–Fully static operation
?In-System Programmable (ISP) Flash memory
?12-clock operation with selectable 6-clock operation (via software or via parallel programmer)
?Memory addressing capability
–Up to 64 kbytes ROM and 64 kbytes RAM
?Power control modes:
–Clock can be stopped and resumed
–Idle mode
–Power-down mode
?Two speed ranges
–0 to 20 MHz with 6-clock operation
–0 to 33 MHz with 12-clock operation
?LQFP, PLCC, and DIP packages
?Dual Data Pointers
?Three security bits
?Four interrupt priority levels
?Six interrupt sources
?Four 8-bit I/O ports
?Full-duplex enhanced UART
–Framing error detection
–Automatic address recognition
?Three 16-bit timers/counters T0, T1 (standard 80C51) and additional T2 (capture and compare)
?Programmable clock-out pin
?Watchdog timer
?Asynchronous port reset
?Low EMI (inhibit ALE, 6-clock mode)
?Wake-up from Power Down by an external interrupt?