描述 Description

The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

特性 Features

? Excellent clamping capability

? Low incremental surge resistance

? For surface mounted applications to optimize board space

? Low profile package

? Typical failure mode is short from over-specified voltage or current

? Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c

? IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)

? ESD protection of data lines in accordance with IEC 61000-4-2

? EFT protection of data lines in accordance with IEC 61000-4-4

? Built-in strain relief

? Fast response time: typically less than 1.0ps from 0V to BV min

? 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01

? High temperature to reflow soldering guaranteed: 260°C/40sec

? VBR @ TJ= VBR@25°C x (1+α T x (T J - 25)) (α T:Temperature Coefficient, typical value is 0.1)

? EPI silicon technology

? Meet MSL level1, per J-STD-020C, LF maximun peak of 260°C

? Matte tin lead–free plated

? Halogen free and RoHS compliant

? Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)

Applications

TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.