NXB0108BQ-Q100屬于集成電路（IC）的轉換器電平移位器。由安世半導體(中國)有限公司制造生產的NXB0108BQ-Q100轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。

1. General description

The NXB0108-Q100 is an 8-bit, dual supply translating transceiver with auto direction sensing, that

enables bidirectional voltage level translation. It features two 8-bit input-output ports (An and Bn),

one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at

any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any voltage between 1.65 V

and 5.5 V, making the device suitable for translating between any of the low voltage nodes (1.2 V,

1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).

Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin

OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for

partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the

damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

? Automotive product qualification in accordance with AEC-Q100 (Grade 1)

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

? Wide supply voltage range:

? VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

? IOFF circuitry provides partial Power-down mode operation

? Inputs accept voltages up to 5.5 V

? ESD protection:

? HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2500 V for A port

? HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15000 V for B port

? CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1500 V

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? Multiple package options

? DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of

solder joints