描述 Description

The NX3L2G66 is a dual low-ohmic single-pole single-throw analog switch. Each switchhas two input/output terminals (nY and nZ) and an active HIGH enable input (nE). Whenpin nE is LOW, the analog switch is turned off.
Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower inputrise and fall times. The NX3L2G66 allows signals with amplitude up to VCC to betransmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 Ω) and flatness(0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.

特性 Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V
1.0 Ω (typical) at VCC = 1.65 V
0.55 Ω (typical) at VCC = 2.3 V
0.50 Ω (typical) at VCC = 2.7 V
0.50 Ω (typical) at VCC = 4.3 V
High noise immunity
ESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V
MM JESD22-A115-A exceeds 200 V
CDM AEC-Q100-011 revision B exceeds 1000 V
IEC61000-4-2 contact discharge exceeds 4000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
Direct interface with TTL levels at 3.0 V
Control input accepts voltages above supply voltage
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C

應(yīng)用 Application

Cell phone
PDA
Portable media player