描述 Description

The NX30P6093A is a 5.6A I2C controlled overvoltage protection load switch for USB Type-C and PD application. It includes under voltage lockout, overvoltage lockout, and over-temperature protection circuits, it is designed to automatically isolate the power switch terminals when a fault condition occurs.
NX30P6093A has a default overvoltage protection threshold, and the OVLO threshold can be adjusted by both external resistor divider on ADJ pin and internal I2C register. USB OTG is supported when the plugged accessory is recognized as an OTG device by system and a 5V source is applied on VOUT pin of NX30P6093A.

特性 Features

? Wide supply voltage range for VIN from 2.8 V to 20.0 V
? System Power supply VDD from 3.0V to 4.5V
? ISW maximum 5.6A continuous current for OVP mode
? Support 1.5A USB OTG
? 29 V tolerance on VIN pin
? 16 m? (typical) ultra Low ON resistance
? Adjustable VIN overvoltage protection by both external resistor and I2C
? Built-in slew rate control for inrush current limit
? Integrated current source for VIN pin impedance detection
? Protection circuitry:
? Over-Temperature Protection
? Over-Voltage Protection
? Under-Voltage Lockout
? Surge protection:
? IEC61000-4-5 exceeds ±100 V on VIN
? ESD protection:
? IEC61000-4-2 contact discharge exceeds 8 kV on VIN
? IEC61000-4-2 air discharge exceeds 15kV on VIN
? HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 3kV on all pins
? MM Class B exceeds 100V on all the pins
? Specified from -40 °C to +85 °C

應(yīng)用 Application

Consumer Electronics

? Notebook

? Smart and feature phones

? Tablets, eBooks