Description:

The NTE926 quad timer is a monolithic timing device which can be used to produce four independent timing functions. The NTE926 output sinks current. This highly stable, general purpose controller can be used in a monostable mode to produce accurate time delays–from microseconds to hours. In the time delay mode of operation, the time is precisely controlled by one external resistor and one capacitor. A stable operation can be achieved by using two of the four timer sections. The four timer section in the NTE926 are edge–triggered, therefore, when connected in tandem for sequential timing applications, no coupling capacitors are required. Output current capability of 100mA is provided in both devices.

Features:

100mA Output Current per Section

Edge–triggered (No Coupling Capacitor)

Output Independent of Trigger Conditions

Wide Supply Voltage Range 4.5V to 18V

Timer Intervals from Microseconds to Hours

Time Period Equals RC

Applications:

Sequential Timing

Time Delay Generation

Precision Timing

Quad One–Shot