Description:

The NTE7096 and NTE7097 are integrated circuits in 8–Lead DIP type packages that incorporate a new precision temperature–controlled oscillator with an internally trimmed discharge current to minimize variations in frequency. A precision duty–cycle clamp eliminates any need for an external oscillator when at, or near, a 50 duty–cycle condition. Duty–cycles greater than 50 are also possible. Special logic ensures that Vref is stabilized before the output stage is enabled. Ion–implant resistors provide tighter control of under–voltage lockout.

Features:

Optimized for Off–Line Control

Internally Trimmed Temperature Compensated Oscillator

Maximum Duty–Cycle Clamp

Vref Stabilized before Output Stage is Enabled

Low Start–Up Current

Pulse–by Pulse Current Limiting

Improved U/V Lockout

Double Pulse Suppression

1 Trimmed Bandgap Reference

High Current Totem Pole Output

Absolute Maximum Ratings:

Supply Voltage (ICC < 30mA) . . . . . . . . . . . . . . .Self Limiting

Supply Voltage (Low Impedence Source) . . . . . . . . . . . .30V

Output Current . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . ±1A

Output Energy (Capacitive Load) . . . . . . . . . . . . . . . . . . . 5μJ

Analog Inputs (Pin2, Pin3) . . . . . . . . . . . . . . . . . –0.3V to VCC

Error Amp Output Sink Current . . . . . . . . . . . .. . . . . . . .10mA