FEATURES

? High adhesive strength between the PVC wire

and the encapsulating lacquer

? Accurate down to ± 0.3 °C

? Small body of max. 3 mm for easy installation

? Material categorization:?

for definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

? Temperature measurement, sensing, and control

? On battery packs, heat-sinks, tubing, enclosures, etc.

DESCRIPTION

These sensors consist of small NTC chip soldered between

stranded AWG #30, PVC 105 °C single hook-up wires (acc.

to UL 1061). Terminations are solder dipped. They are

lacquered and insulated with a black epoxy coating.

MARKING

Black lacquered body without additional mark

PACKAGING

SPQ: 125 items (for standard 40 mm lead wire length)

MOUNTING

Important mounting and handling instructions: see

www.vishay.com/doc?29222

By soldering the wire end, or crimping connector. The body

can be inserted in a tube, free in air, tape attached or glued.

Not intended for fluid immersed applications or continuous

contact with water. Not for potting in hard material or

over-molding applications. Consult Vishay for specific

application or mounting.

DESIGN-IN SUPPORT

? For complete curve computation, please visit:?

www.vishay.com/thermistors/ntc-curve-list/

? Other R/T curves available on request

? The lead length can be customized

? Connectors can be added to the wire end