描述 Description

The NLSX4401 is a 1?bit configurable dual?supply bidirectional
auto sensing translator that does not require a directional control pin.
The I/O VCC and I/O VL ports are designed to track two different
power supply rails, VCC and VL respectively. Both the VCC and VL
supply rails are configurable from 1.5 V to 5.5 V. This allows voltage
logic signals on the VL side to be translated into lower, higher or
equal value voltage logic signals on the VCC side, and vice?versa.
The NLSX4401 translator has integrated 10 k\u0002 pull?up resistors
on the I/O lines. The integrated pull?up resistors are used to pull up
the I/O lines to either VL or VCC. The NLSX4401 is an excellent
match for open?drain applications such as the I2C communication
bus.

特性 Features

? VL can be Less than, Greater than or Equal to VCC
? Wide VCC Operating Range: 1.5 V to 5.5 V
? Wide VL Operating Range: 1.5 V to 5.5 V
? High Speed with 24 Mb/s Guaranteed Date Rate
? Low Bit?to?Bit Skew
? Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
? Non?preferential Powerup Sequencing
? Power?Off Protection

應用 Application

? I2C, SMBus, PMBus
? Low Voltage ASIC Level Translation
? Mobile Phones, Cameras, Consumer Products

簡介

NLSX4401DFT2G屬于集成電路（IC）的轉換器電平移位器。由制造生產的NLSX4401DFT2G轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。