描述 Description

The NCV97311 is a 3?output regulator consisting of a low?Iq battery?connected 3 A, 2 MHz non?synchronous switcher and two low?voltage 1.5 A, 2 MHz synchronous switchers; all using integrated power transistors.
The high?voltage switcher is capable of converting a 4.1 V to 18 V battery input to a 5 V or 3.3 V output at a constant 2 MHz switching frequency, delivering up to 3 A. In overvoltage conditions up to 37 V, the switching frequency folds back to 1 MHz; in load dump conditions up to 45 V the regulator shuts down.
The output of the battery?connected buck regulator serves as the low voltage input for the 2 downstream synchronous switchers. Each downstream output is adjustable from 1.2 V to 3.3 V, with a 1.5 A average current limit and a constant 2 MHz switching frequency. Each switcher has an independent enable and reset pin, giving extra power management flexibility.
For low?Iq operating mode, the low?voltage switchers are disabled and the standby rail is supplied by a low?Iq LDO (up to 150 mA) with a typical Iq of 30 \u0002A. The LDO regulator is in parallel to the high?voltage switcher, and is activated when the switcher is forced in standby mode.
All 3 SMPS outputs use peak current mode control with internal slope compensation, internally?set soft?start, battery undervoltage lockout, battery overvoltage protection, cycle?by?cycle current limiting, hiccup mode short?circuit protection and thermal shutdown. An error flag is available for diagnostics.

特性 Features

? 5.0 V and 3.3 V Versions Available
? Low Quiescent Current in Standby Mode
? Programmable Spread Spectrum for EMI Reduction
? 2 Microcontroller-Enabled Low Voltage Synchronous Buck Converters
? Large Conversion Ratio of 18 V to 3.3 VBattery Connected Switcher
? Wide Input of 4.1 to 45 V with Undervoltage Lockout (UVLO)
? Fixed Frequency Operation Adjustable from 2.0 to 2.6 MHz
? Internal 1.5 ms Soft?starts
? Cycle?by?cycle Current Limit Protections
? Hiccup Overcurrent Protections (OCP)
? Individual Reset Pins with Adjustable Delays
? QFN Package with Wettable Flanks (pin edge plating)
? NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC?Q100 Qualified and PPAP Capable
? These Devices are Pb?Free, Halogen Free/BFR Free and are RoHS Compliant

應用 Application

? Infotainment
? Instruments clusters
? Body Electronics
? Telematics
? ECU
? Automotive

簡介

NCV97311屬于開發(fā)板套件編程器的評估板-DC/DC與AC/DC（離線）SMPS。由制造生產的NCV97311評估板 - DC/DC 與 AC/DC（離線）SMPS該系列產品提供了一種方便的方法，可對開關模式電源轉換所用的器件（包括 DC-DC 和 AC-DC 型）進行性能或特性評估?！胺€(wěn)壓器”（包含內部電源開關裝置）和“控制器”（設計為控制外部電源開關）之類的器件均包括在內。