描述 Description

The NCV7755 is an automotivegrade integrated driver with eight high-side switches. The device provides drive capability up to 700mA per channel and is protected for overload and over temperature conditions. All channels have integrated output clamps for switching inductive loads, multiple start pulses for bulbs, and can be mapped to two internal PWM generators for LED loads. The output control and diagnostics reporting is via SPI. Additionally, INx pins can be mapped to any of the outputs for direct drive.

特性 Features

? Octal channel controlled via SPI or drive pins
? Can control various inductive and capacitive loads
? Two Input Pins with Mapping for PWM Operation
? Desirable for LED loads
? Limp Home Mode with Auto?retry
? Critical loads can be controlled via limp home outputs
? Supports Cranking Voltage of 3V Minimum on VS
? Allow low battery operation
? Over Current Protection
? Protects against short to GND conditions
? Open Load Protection
? Diagnosis no load or short to battery conditions
? Power Supply Monitoring
? Power is distributed to the loads only when the battery supply is stable
? Reverse Polarity Protection
? Lower power loss on the channels during a reverse battery event
? Loss of Ground Protection
? Outputs remain off during a loss of ground event

應(yīng)用 Application

? Automotive Body Control Application
? Automotive Engine Control Application
? Bulb Drive
? LED Drive
? Automotive
? Industrial