NCV70521MN003R2G屬于集成電路（IC）的電機驅動器控制器。由安森美半導體公司制造生產的NCV70521MN003R2G電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

Introduction

The AMIS?30521/NCV70521 is a micro?stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and a SPI interface with an external microcontroller. The AMIS?30521/NCV70521 contains a current?translation table. It takes the next micro?step depending on the clock signal on the “NXT” input pin and the status of the “DIR” (= direction) register or input pin. The chip provides a so?called “Speed and Load Angle” output. This allows the creation of stall detection algorithms and control loops based on load?angle to adjust torque and speed. It is using a proprietary PWM algorithm for reliable current control.

特性 Features

? Dual H?Bridge for 2 Phase Stepper Motors

? Programmable Peak?Current Up to 1.2 A Continuous (1.5 A Short Time), Using a 5?Bit Current DAC

? On?Chip Current Translator

? SPI Interface

? Speed and Load?Angle Output

? 7 Step Modes from Full Step?up to 32 Micro?Steps

? Fully Integrated Current?Sense

? PWM Current Control with Automatic Selection of Fast and Slow Decay

? Low EMC PWM with Selectable Voltage Slopes

? Active Flyback Diodes

? Full Output Protection and Diagnosis

? Thermal Warning and Shutdown

? Digital IO’s Compatible with 5 V and 3.3 V Microcontrollers

? NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes

? These are Pb?Free Devices*