描述 Description

The NCN5150 is a single-chip integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. The transceiver provides all of the functions needed to satisfy the European Standards EN 13757-2 and EN 1434-3 describing the physical layer requirements for M-BUS. It includes a programmable power level of up to 2 (SOIC version) or 6 (NQFP version) unit loads which are available for use in external circuits through a 3.3V LDO regulator. The NCN5150 can provide communication up to the maximum M-BUS communication speed of 38400 baud (half-duplex).

特性 Features

? Single-chip M-Bus transceiver
? UART communication speeds up to 38400 baud
? Integrated 3.3 V VDD LDO regulator with extended peak current capability of 15 mA
? Supports powering slave device from the bus or from external power supply
? Adjustable I/O levels
? Adjustable constant current sink up to 2 or 6 unit loads depending on the package
? Low bus voltage operation
? Extended current budget for external circuits: at least 0.88 mA
? Polarity independent
? Power-fail function
? Fast startup - no external transistor required on STC pin
? Industrial ambient temperature range of -40C to +85C
? Available in: - 16-pin SOIC (pin-to-pin compatible with TSS721A)- 20-pin QFN
? These are Pb-free devices

應用 Application

? Multi-Energy Utility meters- Water- Gas- Electricity- Heating systems

簡介

NCN5150屬于集成電路（IC）的驅動器接收器收發器。由制造生產的NCN5150驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。