MX29F200CTTI-70G屬于集成電路（IC）的存儲器。由旺宏電子股份有限公司制造生產的MX29F200CTTI-70G存儲器存儲器是集成電路上用作數據存儲設備的半導體器件。這些器件分為非易失性或易失性兩種，格式包括 CBRAM、DRAM、EEPROM、EERAM、EPROM、閃存、FRAM、NVSRAM、PCM (PRAM)、PSRAM、RAM 和 SRAM。這些器件的存儲容量為 64 b 至 6 Tb 不等，接口有 I2C、MMC、并行、eMMC、串行、單線、SPI、UFS、Xccela 總線和 1-線。

FEATURES

GENERAL FEATURES

? Single Power Supply Operation

- 4.5 to 5.5 volt for read, erase, and program operations

? 262,144 x 8 / 131,072 x 16 switchable

? Boot Sector Architecture

- T = Top Boot Sector

- B = Bottom Boot Sector

? Sector Structure

- 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 3

? Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Temporary sector unprotected allows code changes in previously locked sectors

? Latch-up protected to 100mA from -1V to Vcc + 1V

? Compatible with JEDEC standard

- Pinout and software compatible to single power supply Flash

PERFORMANCE

? High Performance

- Access time: 70/90ns

- Byte/Word program time: 9us/11us (typical)

- Erase time: 0.7s/sector, 4s/chip (typical)

? Low Power Consumption

- Low active read current: 40mA (maximum) at 5MHz

- Low standby current: 1uA (typical)

? Minimum 100,000 erase/program cycle

? 20 years data retention

SOFTWARE FEATURES

? Erase Suspend/ Erase Resume

- Suspends sector erase operation to read data from or program data to another sector which is not being erased

? Status Reply

- Data# Polling & Toggle bits provide detection of program and erase operation completion

HARDWARE FEATURES

? Ready/Busy# (RY/BY#) Output

- Provides a hardware method of detecting program and erase operation completion

? Hardware Reset (RESET#) Input

- Provides a hardware method to reset the internal state machine to read mode