GENERAL DESCRIPTION

The MX29F002T/B is a 2-mega bit Flash memory organized as 256K bytes of 8 bits only. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29F002T/B is packaged in 32-pin PDIP,PLCC and 32-pin TSOP(I). It is designed to be reprogrammed and erased in-system or in standard EPROM programmers.

FEATURES

? 262,144x 8 only

? Fast access time: 55/70/90/120ns

? Low power consumption

- 30mA maximum active current(5MHz)

- 1uA typical standby current

? Programming and erasing voltage 5V ± 10

? Command register architecture

- Byte Programming (7us typical)

- Sector Erase (16K-Byte x1, 8K-Byte x 2, 32K-Byte x1, and 64K-Byte x 3)

? Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors or the whole chip with Erase Suspend capability.

- Automatically programs and verifies data at specified address

? Erase Suspend/Erase Resume

- Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation.

? Status Reply

- Data polling & Toggle bit for detection of program and erase cycle completion.

? Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Sector protect/unprotect for 5V only system or 5V/12V system

? 100,000 minimum erase/program cycles

? Latch-up protected to 100mA from -1 to VCC+1V

? Boot Code Sector Architecture

- T = Top Boot Sector

- B = Bottom Boot Sector

? Hardware RESET pin(only for 29F002T/B)

- Resets internal state machine to read mode

? Low VCC write inhibit is equal to or less than 3.2V

? Package type:

- 32-pin PDIP

- 32-pin PLCC

- 32-pin TSOP (Type 1)

? 20 years data retention