Designed primarily for use in wireless Personal Communication Systems (PCS) applications such as Digital European Cordless Telephone (DECT), Japan’s Personal Handy System (PHS) and the emerging North American systems as a preamp for discrete or integrated downmixers. The MRFIC1808 is a two–stage low noise amplifier in a low–cost SO–8 package. The amplifier can be matched to optimize gain or noise figure with simple off–chip input matching. The design employs a novel stacked MESFET design which reuses bias current for the highest gain at minimal current. A CMOS compatible RECEIVE ENABLE pin allows for very low standby current while the system is in transmit mode.

? Usable Frequency Range = 1.7 to 2.1 GHz

? 19 dB Typ Gain

? 1.6 dB Typ Noise Figure

? Simple Off–chip Matching for Maximum Gain/Noise Figure Flexibility

? High Reverse Isolation = –34 dB (Typ)

? Low Power Consumption = 13 mW (Typ)

? Single Bias Supply = 2.7 to 4.5 Volts

? Low Standby Current = 8 μA (Typ)

? Low Cost Surface Mount Plastic Package

? Order MRFIC1808R2 forTape and Reel. R2 Suffix = 2,500 Units per 16 mm, 13 inch Reel.

? Device Marking = M1808