描述 Description

The MP4013 is a current mode controller designed for driving the high brightness Light Emitting Diodes (LEDs) with wide supply voltage 8V-26V. It can be used in Boost, Buck, Buck-boost and SEPIC topologies.The MP4013 drives external MOSFET with fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. The switching frequency can be programmed to meet kinds of applications. The cycle-by-cycle current limit can be programmed by the sense resistor on CS pin.The MP4013 integrates a 600mV reference voltage for LED current feedback with ±1.2% accuracy. It outputs a 5V reference voltage with ±1% accuracy, which is used as the reference voltage for external circuit.?The MP4013 implements both DC input analog dimming and pulse signal input analog dimming function. The amplitude of the LED current could be controlled either by the level of a DC input signal or by the duty cycle of a pulse signal. The MP4013 also employs fast and deep PWM dimming to the LED current with high dimming ratio.?MP4013 integrates Under-Voltage Lockout, Over Voltage Protection, Over Current Protection, Short LED Protection, Short Output Protection, Short Inductor/diode Protection and OTP. The fault indicator is pulled low in fault condition.The MP4013 is available in SOIC-16 package.

特性 Features

●Constant-current WLED Driver
●600mV Feedback Voltage with ?.2% Accuracy
●8V-26V Input Voltage
●Programmable Switching Frequency
●Leading Edge Blanking for Current Sense
●High Dimming Ratio Fast DPWM Dimming
●DC Input or Pulse Signal Input Analog Dimming
●5V Reference Voltage with ?% Accuracy
●External PWM Dimming MOS Driver
●Programmable Input Bus Voltage UVLO
●Soft Start
●Over Voltage Protection
●Short LED Protection
●Short Output Protection
●Over Current Protection
●Short Inductor/Diode Protection
●Fault Indicator
●VIN UVLO
● Thermal Shutdown
●Available in SOIC-16 package

簡介

MP4013屬于集成電路（IC）的LED驅動器。由制造生產的MP4013LED 驅動器器件屬于 LED 驅動器電源管理集成電路 (PMIC) 系列，可通過標稱固定電壓的電源為負載（通常為發光二極管）提供電流，并且電流可控。它與用于電壓調節的類似產品的主要區別在于，這類器件提供較低的反饋電壓（以提高系統能效），而且通?？蓪ζ骷ぷ鼽c進行外部控制，可在照明應用中用于實現調光功能。