GENERAL DESCRIPTION

The ML9040-Axx/-Bxx is a dot matrix LCD controller which is fabricated in low power CMOS silicon gate technology. Character display on the dot matrix character type LCD can be controlled in combination with a 4-bit or 8-bit microcontroller. This LSI consists of 16-dot COMMON driver, 40-dot SEGMENT driver, display data RAM, character generator RAM, character generator ROM and control circuit.

FEATURES

? Easy interface with an 8-bit or 4-bit microcontroller.

? Dot matrix LCD controller/driver for lowercase (5 x 7 dots) or uppercase (5 x 10 dots).

? Automatic power ON reset.

? COMMON signal drivers (16) and SEGMENT signal drivers (40).

? Can control up to 80 characters when used in combination with MSM5259.

? Character generator ROM for 160 characters with lowercase (5 x 7 dots) and 32 characters with

uppercase (5 x 10 dots).

? Character patterns are programmable by character generator RAM. (Lowercase: 5 x 8 dots, 8 patterns, uppercase: 5 x 11 dots, 4 patterns).

? Built-in oscillation circuit to connect with external resistor or ceralock.

? 1/8 duty (1 line; 5 x 7 dots + cursor), 1/11 duty (1 line; 5 x 10 dots + cursor), or 1/16 duty (2

lines; 5 x 7 dots + cursor), selectable.

? Clear display even at 1/5 bias, 3.0V LCD driving voltage.

? LCD driving waveform

ML9040-Axx: A mode

ML9040-Bxx: B mode

? Package options:

80-pin plastic QFP (QFP80-P-1420-0.80-BK)

(Product name: ML9040-Axx/-BxxGA)

xx indicates code number.