描述 Description

GENERAL DESCRIPTION
The ML4622 and ML4624 data quantizers are low noise, wideband, bipolar monolithic ICs designed specifically for signal recovery applications in fiberoptic receiver systems. They contain a wideband limiting amplifier which is capable of accepting an input signal as low as 2mVP-P with a 55dB dynamic range. This high level of sensitivity is achieved by using a DC restoration feedback loop which nulls any offset voltage produced in the limiting amplifier.
The output stage is a high speed comparator circuit with both TTL and ECL outputs. An enable pin is included for added control.
The Link Detect circuit provides a Link Monitor function with a user selectable reference voltage. This circuit monitors the peaks of the input signal and provides a logic level output indicating when the input falls below an acceptable level. This output can be used to disable the quantizer and/or drive an LED, providing a visible link status.FEATURES
■ Data rates up to 40MHz or 80MBd
■ Can be powered by either +5V providing TTL or raised ECL level outputs or –5.2V providing ECL levels
■ Low noise design: 25μV RMS over bandwidth
■ Adjustable Link Monitor function with hystersis
■ Wide 55dB input dynamic range
■ Low power design
■ ML4624 is pin compatible with the ML4621APPLICATIONS
■ IEEE 802.3 10BASE-FL Receiver
■ IEEE 802.5 fiber optic token ring, 4 and 16mbps
■ Fiber Optic Data Communications and Telecommunications Receivers

特性 Features

■ Data rates up to 40MHz or 80MBd
■ Can be powered by either +5V providing TTL or raised ECL level outputs or –5.2V providing ECL levels
■ Low noise design: 25μV RMS over bandwidth
■ Adjustable Link Monitor function with hystersis
■ Wide 55dB input dynamic range
■ Low power design
■ ML4624 is pin compatible with the ML4621

應(yīng)用 Application

■ IEEE 802.3 10BASE-FL Receiver
■ IEEE 802.5 fiber optic token ring, 4 and 16mbps
■ Fiber Optic Data Communications and Telecommunications Receivers