The 33996 is a 16-output low side switch with a 24-bit serial input control. It is designed for a variety of applications including inductive, incandescent, and LED loads. The Serial Peripheral Interface (SPI) provides both input control and diagnostic readout. A Pulse Width Modulation (PWM) control input is provided for pulse width modulation of multiple outputs at the same duty cycle. A dedicated reset input provides the ability to clear all internal registers and turn all outputs off.

特性 Features

? Designed to operate 5.0V < VPWR < 27V

? 24 Bit SPI for control and fault reporting, 3.3/5.0V compatible

? Outputs are current limited (0.9 to 2.5A) to drive incandescent lamps

? Output voltage clamp of +50V during inductive switching

? On/Off control of open load detect current (LED application)

? VPWR standby current < 10μA

? RDS(ON) of 0.55Ω at 25°C typical

? Independent over-temperature protection

? Output selectable for PWM control

? Output ON short-to-VBAT and off short-to-ground/open detection

? Pb-free packaging designated by suffix code EK