MCP4725A2T-E/CH屬于集成電路（IC）的數模轉換器（DAC）。由微芯科技股份有限公司制造生產的MCP4725A2T-E/CH數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字?jǐn)?shù)據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。

General Description

The MCP4725 is a low-power, high accuracy, single

channel, 12-bit buffered voltage output Digital-to-

Analog Converter (DAC) with nonvolatile memory

(EEPROM). Its on-board precision output amplifier

allows it to achieve rail-to-rail analog output swing.

The DAC input and configuration data can be

programmed to the nonvolatile memory (EEPROM) by

the user using I2C interface command. The nonvolatile

memory feature enables the DAC device to hold the

DAC input code during power-off time, and the DAC

output is available immediately after power-up. This

feature is very useful when the DAC device is used as

a supporting device for other devices in the network.

The device includes a Power-on-Reset (POR) circuit to

ensure reliable power-up and an on-board charge

pump for the EEPROM programming voltage. The

DAC reference is driven from VDD directly. In powerdown

mode, the output amplifier can be configured to

present a known low, medium, or high resistance

output load.

The MCP4725 has an external A0 address bit selection

pin. This A0 pin can be tied to VDD or VSS of the user’s

application board.

The MCP4725 has a two-wire I2C compatible serial

interface for standard (100 kHz), fast (400 kHz), or high

speed (3.4 MHz) mode.

The MCP4725 is an ideal DAC device where design

simplicity and small footprint is desired, and for

applications requiring the DAC device settings to be

saved during power-off time.

The device is available in a small 6-pin SOT-23 and DFN package.

Features

? 12-Bit Resolution

? On-Board Nonvolatile Memory (EEPROM)

? ±0.2 LSB DNL (typical)

? External A0 Address Pin

? Normal or Power-Down Mode

? Fast Settling Time: 6 μs (typical)

? External Voltage Reference (VDD)

? Rail-to-Rail Output

? Low Power Consumption

? Single-Supply Operation: 2.7V to 5.5V

? I2C Interface:

- Eight Available Addresses

- Standard (100 kbps), Fast (400 kbps), and

High-Speed (3.4 Mbps) Modes

? Small 6-Lead SOT-23 and DFN Package Options

? Extended Temperature Range: -40°C to +125°C

Applications

? Set Point or Offset Trimming

? Sensor Calibration

? Closed-Loop Servo Control

? Low Power Portable Instrumentation

? PC Peripherals

? Data Acquisition Systems