MCP3001屬于集成電路（IC）的模數轉換器（ADC）。由美國微芯科技公司制造生產的MCP3001模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

描述 Description

The Microchip Technology Inc. MCP3001 is a succes sive approximation 10-bit A/D converter (ADC) with on board sample and hold circuitry. The device provides a single pseudo-differential input. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are both specified at ±1 LSB max. Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of sample rates up to 200 ksps at a clock rate of 2.8 MHz. The MCP3001 operates over a broad voltage range (2.7V - 5.5V). Low current design permits operation with a typical standby current of only 5 nA and a typical active current of 400 μA. The device is offered in 8-pin PDIP, MSOP, TSSOP and 150 mil SOIC packages.

特性 Features

? 10-bit resolution

? ±1 LSB max DNL

? ±1 LSB max INL

? On-chip sample and hold

? SPI? serial interface (modes 0,0 and 1,1)

? Single supply operation: 2.7V - 5.5V

? 200 ksps sampling rate at 5V

? 75 ksps sampling rate at 2.7V

? Low power CMOS technology

- 5 nA typical standby current, 2 μA max

- 500 μA max active current at 5V

? Industrial temp range: -40°C to +85°C

? 8-pin PDIP, SOIC, MSOP and TSSOP packages

Applications

? Sensor Interface

? Process Control

? Data Acquisition

? Battery Operated Systems