描述 Description

The MCP2150 is a cost effective, low pin count (18-pin), easy to use device for implementing IrDA standard wireless connectivity. The MCP2150 provides support for the IrDA standard protocol “stack” plus bit encoding/decoding.The serial interface baud rates are user selectable to one of four IrDA standard baud rates between 9600 baud and 115.2 kbaud (9600, 19200, 57600, 115200). The IR baud rates are user selectable to one of five IrDA standard baud rates between 9600 baud and 115.2 kbaud (9600, 19200, 37400, 57600, 115200). The serial interface baud rate will be specified by the BAUD1: BAUD0 pins, while the IR baud rate is specified by the Primary Device (during Discover phase). This means that the baud rates do not need to be the same. The MCP2150 operates in Data Terminal Equipment (DTE) applications and sits between a UART and aninfrared optical transceiver.The MCP2150 encodes an asynchronous serial data stream, converting each data bit to the corresponding infrared (IR) formatted pulse. IR pulses received are decoded and then handled by the protocol handler state machine. The protocol handler sends the appropriate data bytes to the Host Controller in UART formatted serial data.The MCP2150 supports “point-to-point” applications. That is, one Primary device and one Secondary device. The MCP2150 operates as a Secondary device. It does not support “multi-point” applications.Sending data using IR light requires some hardware and the use of specialized communication protocols. These protocol and hardware requirements are described, in detail, by the IrDA standard specifications. The encoding/decoding functionality of the MCP2150 is designed to be compatible with the physical layer component of the IrDA standard. This part of the standard is often referred to as “IrPHY”.The complete IrDA standard specifications are available for download from the IrDA website (www.IrDA.org).

特性 Features

IrLAP
IrLMP
IAS
TinyTP
IrCOMM (9-wire \"cooked\" service class)
Bidirectional communication
CRC implementation
Data communication rates up to 115.2 kbaud
Easily interfaces with Industry standard UARTs and infrared transceivers
UART interface for connecting to Data Terminal Equipment (DTE) systems
Transmit/Receive formats (bit width) supported: 1.63 μs
9.6 kbaud
19.2 kbaud
57.6 kbaud
115.2 kbaud
9.6 kbaud
19.2 kbaud
38.4 kbaud
57.6 kbaud
115.2 kbaud
64 Byte Data Packet Size
Programmable Device ID String
Operates as Secondary Device

簡介

MCP2150屬于集成電路（IC）的控制器。由制造生產的MCP2150控制器該系列產品主要用于在采用不同通信協議和/或信令方法的端點之間提供信息連接。示例包括將 I2C 總線連接到 UART，將 USB 連接到 I2C、SPI、以太網或 UART、以太網 MAC 和 PHY 等的器件。此外，還包括用于通過為點對點通信設計的接口建立多路連接的器件，例如 USB 集線器控制器。