描述 Description

The MCP14A1201/2 devices are high-speed MOSFET drivers that are capable of providing up to 12 A of peak current while operating from a single 4.5 V to 18 V supply. There are two output configurations available; inverting (MCP14A1201) and noninverting (MCP14A1202). These devices feature low shoot-through current, fast rise and fall times, and matched propagation delays which make them ideal for high speed switching frequency applications.The MCP14A1201/2 family of devices offers enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A1201/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against electrostatic discharge (ESD) up to 2 kV (HBM) and 200 V (MM).

特性 Features

High Peak Output Current: 12 A (typical)
Wide Operating Range: 4.5 V to 18 V
Low Shoot-Through/Cross-Conduction Current in Output Stage
High Capacitive Load Drive Capability: 15,000 pF in 25 ns (typical)
Short Delay Times: 28 ns (D1)28 ns (D2) (typical)
Low Supply Current: 360 μA (typical)
Low Voltage Threshold Input and Enable with Hysteresis
Latch-Up Protected: Withstands 0.5 A Reverse Current

簡介

MCP14A1202屬于集成電路（IC）的柵極驅動器。由制造生產的MCP14A1202柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。