MAX96717屬于集成電路（IC）的串行器解串器。由亞德諾半導體技術有限公司制造生產的MAX96717串行器，解串器串行器將并行提供的信息轉換為較高符號率的串行數據流，從而減少數字信息傳輸所需的導線數量；解串器執行相反的功能。常用于在圖像傳感器、圖像處理器和顯示器之間傳輸視頻數據，還有針對工業 I/O 設備等其他應用而定制的器件。

General Description

The MAX96717 GMSL? serializer receives video on an MIPI CSI-2 interface and outputs it on a GMSL2 serial link transceiver. Simultaneously, it sends and receives bidirectional control channel data across the same GMSL2 link. GMSL2 data can be transported over Coaxial or Shielded-Twisted Pair (STP) cables. It operates at a fixed rate of 3Gbps or 6Gbps in the forward direction, and 187.5Mbps in the reverse direction. The device is programmed through a local I2C/UART interface or across the link from a matching deserializer. The MAX96717 includes two I2C/UART pass-through channels, flexible GPIO, SPI tunnel, a built-in ADC, temperature sensor, and an extensive set of diagnostics for functional safety. Operation is specified over the automotive temperature range of -40°C to +105°C and the device is AEC-Q100 Grade 2 qualified.

Data can be transmitted over low-cost 50Ω Coax or 100Ω STP cables that meet the GMSL2 channel specification. Table 1 provides guidance to typical maximum lengths of commonly used automotive cables. Contact the factory for the GMSL2 channel specification.

Benefits and Features

●Automotive Grade High Speed Link

?-21.0dB at 3GHz (6Gbps) Max Insertion Loss

?-19.5dB at 1.5GHz (3Gbps) Max Insertion Loss

?Auto Adapt for Changes in Channel Conditions

?Operates at -40°C to +105°C Ambient

●Four-Lane MIPI CSI-2 v1.3 Input Port

?MIPI D-PHY v1.2 Receivers rated at 2.5Gbps perLane

?Supports any CSI-2 Data Type in Tunneling Mode

?Cyclic Redundancy Check (CRC), and ErrorCorrection Code (ECC)

?16 Virtual Channels

?Polarity Flip and Data Lane Reassignment

●Full-Duplex Communication Over a Single Wire

●3Gbps or 6Gbps Forward-Link Rates, and 187.5MbpsReverse-Link Rate

●ASIL-B Compliant

?End-to-End Data Integrity through CRC inTunneling Mode

?R-S Forward-Error Correction (FEC) for Protectionof Forward Video and Control-Channel Data

?CRC Protection of Side-Channel and Video Data

?Power-on Self Test

●Concurrent Side Channel for Device Configurationand Communication with Peripherals

?I2C/UART, Pass-Through I2C/UART, SPI, GPIO,and Register-Programmable GPIO

●Crystal-Free Operation Using Reference OverReverse (RoR) Clocking

●Reference Clock Output for Image Sensor

●Built-in ADC and Temperature Sensor

●Compact 5mm x 5mm TQFN Side-Wettable Packagewith 0.5mm Pitch

Applications

●Advanced Driver Assistance Systems (ADAS)

●8Mp 40fps Forward-Vision Camera (FVC) Systems

●Surround View Systems (SVS)

●Driver Monitor Systems (DMS)

●Rear-View Camera (RVC)

●Systems with Multiple Synchronized Cameras