General Description

The MAX7033 fully integrated low-power CMOS super heterodyne receiver is ideal for receiving amplitude shift keyed (ASK) data in the 300MHz to 450MHz frequency range. The receiver has an RF input signal range of -114dBm to 0dBm. With few external components and a low-current power-down mode, it is ideal for cost-sensitive and power-sensitive applications typical in consumer markets. The MAX7033 consists of a low-noise amplifier (LNA), a fully differential image-rejection mixer, an on-chip phase-locked loop (PLL) with integrated voltage controlled oscillator (VCO), a 10.7MHz IF limiting amplifier stage with received-signal-strength indicator (RSSI), and analog baseband data-recovery circuitry. The MAX7033 also has a discrete one-step automatic gain control (AGC) that reduces the LNA gain by 35dB when the RF input signal exceeds -62dBm. The AGC circuitry offers an externally controlled hold feature.

The MAX7033 is available in 28-pin TSSOP and 32-pin TQFN packages and is specified over the extended (-40°C to +105°C) temperature range.

特性 Features

● Optimized for 315MHz or 433MHz Band

● Operates from Single +3.3V or +5.0V Supplies

● High Dynamic Range with On-Chip AGC

● AGC Hold Circuit

● 1ms AGC Release Time

● Selectable Image-Rejection Center Frequency

● Selectable x64 or x32 fLO/fXTAL Ratio

● Low 5.2mA Operating Supply Current

● < 3.5μA Low-Current Power-Down Mode for Efficient Power Cycling

● 250μs Startup Time

● Built-In 44dB RF Image Rejection

● Better than -114dBm Receive Sensitivity

● -40°C to +105°C Operation

Applications

● Security Systems

● Garage Door Openers

● Home Automation

● Remote Controls

● Local Telemetry

● Wireless Sensors