描述 Description

The MAX6406–MAX6411 is a family of ultra-low power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring system voltages from 2.5V to 5.0V. A manual reset input is also included.
The MAX6406–MAX6411 assert a signal whenever the VCC supply voltage falls below a preset threshold. These devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6406/MAX6409 (push-pull) and the MAX6408/MAX6411 (open-drain) have an active-low output (active-low OUT is logic low when VCC is below VTH). The MAX6407/MAX6410 have an active-high push-pull output (OUT is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The detector is designed to ignore fast transients on VCC. The MAX6406/MAX6407/MAX6408 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6409/MAX6410/MAX6411 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments.
Ultra-low supply current of 500nA (MAX6406/MAX6407/MAX6408) makes these parts ideal for use in portable equipment. These devices are available in 4-bump chip-scale packages (UCSP?).

特性 Features

·Tiny 4-Bump (2 x 2) UCSP (See UCSP Reliability Section for More Details).
·\t70% Smaller Than SC70 Packages
·Ultra-Low 500nA Supply Current (MAX6406/MAX6407/MAX6408)
·\tFactory-Trimmed Reset Thresholds from 2.20V to 4.63V in Approximately 100mV Increments
·\t±2.5% Threshold Accuracy (-40°C to +85°C)
·Manual Reset Input
·\tGuaranteed OUT Valid to VCC = 1.0V
·Three Reset Output Logic Options: Active-Low Push-Pull, Active-High Push-pull, and Active-Low Open-Drain
·Immune to Short VCC Transients
·\tNo External Components

應用 Application

·蜂窩電話
·MP3播放器
·尋呼機
·PDA
·便攜式電池供電設備

簡介

MAX6410屬于集成電路（IC）的監控器。由制造生產的MAX6410監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。