描述 Description

The MAX6316–MAX6322 family of microprocessor (μP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68HC11) reset outputs, along with watchdog and manual reset features. The Selector Guide below lists the specific functions available from each device.
These devices are available in 26 factory-trimmed reset threshold voltages (from 2.5V to 5V, in 100mV increments), featuring four minimum power-on reset timeout periods (from 1ms to 1.12s), and four watchdog timeout periods (from 6.3ms to 25.6s). Thirteen standard versions are available with an order increment requirement of 2500 pieces (see Standard Versions table in the full data sheet); contact the factory for availability of other versions, which have an order increment requirement of 10,000 pieces.
The MAX6316–MAX6322 are offered in a miniature 5-pin SOT23 package.

特性 Features

·Integrated Configuration Enables Flexible Designs
· Available in 26 Reset- Threshold Voltages
·2.5V to 5V, in 100mV Increments
·Four Reset Timeout Periods
·1ms, 20ms, 140ms, or 1.12s (min)
· Four Watchdog Timeout Periods
·6.3ms, 102ms, 1.6s, or 25.6s (typ)
· Four Reset Output Stages
·Active-High, Push/Pull
·Active-Low, Push/Pull
·Active-Low, Open-Drain
·Active-Low, Bidirectional
· Integrated Features Increases Robustness
· Guaranteed Reset Valid to VCC = 1V
·Immune to Short-Negative VCC Transients
· Saves Board Space
·No External Components
· Small 5-Pin SOT23 Package
·AEC-Q100 Qualified

應用 Application

·計算機
·控制器
·嵌入式控制系統
·智能儀表
·便攜式電池供電設備
·便攜式計算機

簡介

MAX6316L屬于集成電路（IC）的監控器。由制造生產的MAX6316L監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。