描述 Description

The MAX6061-MAX6068 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input voltage range from (VOUT + 50mV typ) to 12.6V and are available with output voltage options of 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, and 5V. They feature a proprietary curvature-correction circuit and laser-trimmed thin-film resistors that result in a very low temperature coefficient of 20ppm/°C (max) and an initial accuracy of ±0.2% (max). Specifications apply to the extended temperature range (-40°C to +85°C).
The MAX6061?MAX6068 typically draw only 90μA of supply current and can source 5mA or sink 2mA of load current. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external resistor, these devices offer a supply current that is virtually independent of the supply voltage (8μA/V variation) and do not require an external resistor. Additionally, the internally compensated devices do not require an external compensation capacitor and are stable with up to 1μF of load capacitance. Eliminating the external compensation capacitor saves valuable board area in space-critical applications. Low dropout voltage and supply independent, ultra-low supply current make these devices ideal for battery-operated, high-performance, low-voltage systems.
The MAX6061–MAX6068 are available in a 3-pin SOT23 package.

特性 Features

· Ultra-Small 3-Pin SOT23 Package
· ±0.2% max Initial Accuracy
· 20ppm/°C max Temperature Coefficient
· \t5mA Source Current
· \t2mA Sink Current
· \tNo Output Capacitor Required
· \tStable with CLOAD = 0 to 1μF
· \t90μA typ Quiescent Supply Current
· 200mV max Dropout at 1mA Load Current
· \tOutput Voltage Options: 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, 5V
· \t13μVp-p Noise 0.1Hz to 10Hz (MAX6061)

應用 Application

·A/D轉換器
·蜂窩電話
·筆記本電腦
·PDA、GPS、DMM
·便攜式電池供電系統
·精密3V/5V系統

簡介

MAX6063A屬于集成電路（IC）的電壓基準。由制造生產的MAX6063A電壓基準產品屬于基準電壓源系列，可通過相對較不穩定的電源提供穩定的電勢，電壓值始終保持恒定，以便在測量、控制和類似應用中用作比較的標準。其功能行為可能與用于大功率調節的線性穩壓器相似，但基準電壓源器件卻不適合用于此類用途。用作比較標準時，若輸出電流容量或?qū)嶋H負載電流增大，其性能通常會降低。