描述 Description

The MAX5264 contains eight 14-bit, voltage-output digital-to-analog converters (DACs). On-chip precision output amplifiers provide the voltage outputs. The device operates from +14V/-9V supplies. Its bipolar output voltage swing ranges from +9V to -4V and is achieved with no external components. The MAX5264 has three pairs of differential reference inputs; two of these pairs are connected to two DACs each, and a third pair is connected to four DACs. The references are independently controlled, providing different full-scale output voltages to the respective DACs. The MAX5264 operates within the following voltage ranges: VDD = +7V to +14V, VSS = -5V to -9V, and VCC = +4.75V to +5.25V.
The MAX5264 features double-buffered interface logic with a 14-bit parallel data bus. Each DAC has an input latch and a DAC latch. Data in the DAC latch sets the output voltage. The eight input latches are addressed with three address lines. Data is loaded to the input latch with a single write instruction. An asynchronous load input (active-low LD) transfers data from the input latch to the DAC latch. The active-low LD input controls all DACs; therefore, all DACs can be updated simultaneously by asserting the active-low LD pin. An asynchronous active-low CLR input sets the output of all eight DACs to the respective DUTGND input of the op amp. Note that active-low CLR is a CMOS input, which is powered by VDD. All other logic inputs are TTL/CMOS compatible. The \"A\" grade of the MAX5264 has a maximum INL of ±4LSBs, while the \"B\" grade has a maximum INL of ±8LSBs. Both grades are available in 44-pin MQFP packages.

特性 Features

? Full 14-Bit Performance Without Adjustments
? 8 DACs in a Single Package
? Buffered Voltage Outputs
? Unipolar or Bipolar Voltage Swing to +9V and -4V
? 22μs Output Settling Time
? Drives Up to 10,000pF Capacitive Load
? Low Output Glitch: 30mV
? Low Power Consumption: 10mA (typ)
? Small 44-Pin MQFP Package
? Double-Buffered Digital Inputs
? Asynchronous Load Updates All DACs Simultaneously
? Asynchronous CLR-bar Forces All DACs to DUTGND Potential

應用 Application

? 任意函數發生器
? 自動測試設備(ATE)
? 航空電子與軍用系統
? 數字增益與失調控制
? 工業過程控制
? 元件數最少的模擬系統
? SONET應用

簡介

MAX5264屬于集成電路（IC）的數模轉換器（DAC）。由制造生產的MAX5264數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字數據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。