MAX3238ECDWR屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的MAX3238ECDWR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

FEATURES

RS-232 Bus-Pin ESD Protection Exceeds

±15 kV Using Human-Body Model (HBM)

Meets or Exceeds the Requirements of

TIA/EIA-232-F and ITU v.28 Standards

Operates With 3-V to 5.5-V VCC Supply

Operates up to 400 kbit/s

Five Drivers and Three Receivers

Auto-Powerdown Plus Feature Enables

Flexible Power-Down Mode

Low Standby Current . . . 1 mA Typical

External Capacitors . . . 4 ′ 0.1 mF

Accepts 5-V Logic Input With 3.3-V Supply

Always-Active Noninverting Receiver Output

(ROUT1B)

Alternative High-Speed Pin-Compatible

Device (1 Mbit/s) for SNx5C3238

ESD Protection for RS-232 Interface Pins

– ±15 kV – Human-Body Model (HBM)

– ±8 kV – IEC61000-4-2, Contact Discharge

– ±15 kV – IEC61000-4-2, Air-Gap Discharge

APPLICATIONS

Battery-Powered Systems

PDAs

Notebooks

Subnotebooks

Laptops

Palmtop PCs

Hand-Held Equipment

Modems

Printers

DESCRIPTION/ORDERING INFORMATION

The MAX3238E consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV

ESD (HBM) protection on the driver output (DOUT) and receiver input (RIN) terminals. The device meets the

requirements of TIA/EIA-232-F and provides the electrical interface between notebook and subnotebook

computer applications. The charge pump and four small external capacitors allow operation from a single 3-V to

5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT1B), which allows

applications using the ring indicator to transmit data while the device is powered down. This device operates at

data signaling rates up to 250 kbit/s and a maximum of 30-V/ms driver output slew rate.