描述 Description

The MAX1200 16-bit, monolithic, analog-to-digital converter (ADC) is capable of conversion rates up to 1Msps. This CMOS integrated circuit uses a fully differential, pipelined architecture with digital error correction and a short self-calibration to ensure 16-bit linearity at full sample rates. An on-chip track/hold (T/H) maintains superb dynamic performance up to the Nyquist frequency. The MAX1200 operates from a single +5V supply.
The fully differential inputs allow an input swing of ±VREF. The reference is also differential with the positive reference (RFPF) typically connected to +4.096V and the negative reference (RFNF) connected to analog ground. Additional sensing pins (RFPS, RFNS) are provided to compensate for any resistive divider action that may occur. A single-ended input is also possible using two operational amplifiers.
Power dissipation is typically only 273mW at +5V, at a sampling rate of 1Msps. The device employs a CMOS-compatible, 16-bit parallel, two's complement output data format. For a higher sampling speed (up to 2.2Msps) but lower resolution (14-bit), select the MAX1201, a pin-compatible version of the MAX1200.
The MAX1200 is available in an MQFP package and operates over the commercial (0°C to +70°C) and extended-industrial (-40°C to +85°C) temperature ranges.

特性 Features

? Monolithic 16-Bit, 1Msps A/D Converter
? Single +5V Supply
? ±VREF Differential Input Voltage Range
? 87dB SNR for fIN = 100kHz
? 91dB SFDR for fIN = 100kHz
? 273mW Low-Power Dissipation
? ±0.5LSB Differential Nonlinearity Error
? Three-State, Two's Complement Output Data
? On-Demand Self-Calibration
? Pin-Compatible 14-Bit Versions Available (1Msps MAX1205, 2.2Msps MAX1201)

應用 Application

? 通信系統
? 數據采集
? 高分辨率圖像
? 儀表
? 掃描儀

簡介

MAX1200屬于RF/IF射頻/中頻RFID的射頻放大器。由制造生產的MAX1200射頻放大器在射頻應用中，射頻放大器產品可用于信號增益和緩沖。這些產品與通用運算放大器的不同之處在于，它們通常適用于更高的頻率，更傾向于提供不可調節的固定增益，并且輸入或輸出阻抗值符合常用傳輸線特性阻抗。