描述 Description

The MAX100 ECL-compatible, 250Msps, 8-bit analog-to-digital converter (ADC) allows accurate digitizing of analog signals from DC to 125MHz (Nyquist frequency). Designed with Maxim's proprietary advanced bipolar processes, the MAX100 contains a high-performance track/hold (T/H) amplifier and a quantizer in a single ceramic strip-line package.
The innovative design of the internal T/H assures an exceptionally wide input bandwidth of 1.2GHz and aperture delay uncertainty of less than 2ps, resulting in a high 6.8 effective bits performance. Special comparator output design and decoding circuitry reduce out-of-sequence code errors. The probability of erroneous codes occurring due to metastable states is reduced to less than 1 error per 1015 clock cycles. Unlike other ADCs, which can have errors that result in false full-scale or zero-scale outputs, the MAX100 keeps the magnitude to less than 1LSB.
The analog input is designed for either differential or single-ended use with a ±270mV range. Sense pins for the reference input allow full-scale calibration of the input range or facilitate ratiometric use. Midpoint tap for the reference string is available for applications that need to modify the output coding for a user-defined bilinear response. Use of separate high-current and low-current ground pins provides better noise immunity and highest device accuracy.
Dual output data paths provide several data output modes for easy interfacing. These modes can be configured as either one or two identical latched ECL outputs. An 8:16 demultiplexer mode that reduces the output data rates to one-half the clock rate is also available.
For applications that require faster data rates, refer to Maxim's MAX101, which allows conversion rates up to 500Msps.

特性 Features

? 250Msps Conversion Rate
? 6.8 Effective Bits at 125MHz
? Less than ±1/2LSB INL
? 50Ω Differential or Single-Ended Inputs
? ±270mV Input Signal Range
? Reference Sense Inputs
? Ratiometric Reference Inputs
? Configurable Dual-Output Data Paths
? Latched, ECL-Compatible Outputs
? Low Error Rate, Less than 10-15 Metastable States
? Selectable On-Chip 8:16 Demultiplexer
? 84-Pin Ceramic Flat pack

應用 Application

? 通信系統
? 高能物理
? 高速數字儀表
? 高速信號處理
? 醫療系統
? 雷達/聲納

簡介

MAX100屬于集成電路（IC）的模數轉換器（ADC）。由制造生產的MAX100模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。