M74HC165屬于集成電路（IC）的移位寄存器。由意法半導體集團制造生產的M74HC165移位寄存器移位寄存器是低級邏輯器件，通常用于在串行和并行方式之間轉換數字邏輯信號形式的數據，或在數字字內移動數據位的位置。移位寄存器通常使用集成到一個設備中的一組觸發器來實現，常用于集成度更高的邏輯器件，但仍可用于 I/O 擴展等應用，在這些應用中離散形式的函數可能會非常有用。

描述 Description

The M74HC165 is a high speed CMOS 8-bit PISO (parallel-in-serial-out) shift register fabricated with silicon gate C2MOS technology. This device contains eight clocked master slave RS flip-flops connected as a shift register, with auxiliary gating to provide overriding asynchronous parallel entry. The parallel data enter when the shift/load input is low and can change while shift/load is low, provided that the recommended set-up and hold times are observed. For clocked operation, shift/load must be high. The two clock inputs perform identically: one can be used as a clock inhibit by applying a high signal, to allow this operation clocking is accomplished through a 2-input nor gate. To avoid double clocking, however, the inhibit signal should only go high while the clock is high. Otherwise the rising inhibit signal causes the same response as rising clock edge. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

特性 Features

■ High speed:

– tPD = 15 ns (typ.) at VCC = 6 V

■ Low power dissipation:

– ICC = 4 μA (max.) at TA = 25 °C

■ High noise immunity:

VNIH = VNIL = 28 VCC (Min.)

■ Symmetrical output impedance:

|IOH| = IOL = 4 mA (min)

■ Balanced propagation delays: tPLH ? tPHL

■ Wide operating voltage range:

VCC (opr) = 2 V to 6 V

■ Pin and function compatible with 74 series 165