DESCRIPTION

The M50LPW012 is a 2Mbit (256Kb x8) nonvolatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage (3.0 to 3.6V) supply. For fast programming and fast erasing in production lines an optional 12V power supply can be used to reduce the programming and the erasing times.

■ SUPPLY VOLTAGE

– VCC = 3V to 3.6V for Program, Erase and Read Operations

– VPP = 12V for Fast Program and Fast Erase

■ LOW PIN COUNT (LPC)

– Standard Interface for embedded operation with PC Chipsets that are without automapping memory features

■ ADDRESS/ADDRESS MULTIPLEXED (A/A MUX)

– Interface for programming equipment compatibility

■ LOW PIN COUNT (LPC) HARDWARE INTERFACE MODE

– 5 Signal Communication Interface supporting Read and Write Operations

– Hardware Write Protect Pins for Block Protection

– Register Based Read and Write Protection

– 5 Additional General Purpose Inputs for platform design flexibility

– Synchronized with 33MHz PCI clock

■ BYTE PROGRAMMING TIME

– Single Byte Mode 10μs typical

– Quadruple Byte Mode 2.5μs typical

■ 7 MEMORY BLOCKS

– 1 Boot Block

– 4 Main Blocks and 2 Parameter Blocks

■ PROGRAM/ERASE CONTROLLER

– Embedded Byte Program and Block/Chip Erase algorithms

– Status Register Bits

■ PROGRAM and ERASE SUSPEND

■ FOR USE in PC BIOS APPLICATIONS

■ ELECTRONIC SIGNATURE

– Manufacturer Code: 20h

– Device Code: 3Bh