最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

LPC2138

Single-chip 16/32-bit microcontrollers; 32/64/512 kB ISP/IAP Flash with 10-bit ADC and DAC

Generaldescription TheLPC2131/2132/2134/2136/2138microcontrollersarebasedona32/16bitARM7TDMI-SCPUwithreal-timeemulationandembeddedtracesupport,thatcombinesthemicrocontrollerwith32kB,64kB,128kB,256kBand512kBofembeddedhighspeedFlashmemory.A128-bitwid

ETC

LPC2138

Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP flash with 10-bit ADC and DAC

Generaldescription TheLPC2131/32/34/36/38microcontrollersarebasedona16/32-bitARM7TDMI-SCPUwithreal-timeemulationandembeddedtracesupport,thatcombinethemicrocontrollerwith32kB,64kB,128kB,256kBand512kBofembeddedhigh-speedflashmemory.A128-bitwidememoryinte

ETC

LPC2138

ARM7-based microcontrollers with two 10-bit ADCs and 10-bit DAC

ETC

LPC2138

Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP flash with 10-bit ADC and DAC

ETC

LPC2138FBD64

Single-chip 16/32-bit microcontrollers; 32/64/512 kB ISP/IAP Flash with 10-bit ADC and DAC

Generaldescription TheLPC2131/2132/2134/2136/2138microcontrollersarebasedona32/16bitARM7TDMI-SCPUwithreal-timeemulationandembeddedtracesupport,thatcombinesthemicrocontrollerwith32kB,64kB,128kB,256kBand512kBofembeddedhighspeedFlashmemory.A128-bitwid

ETC

LPC2138FBD64

單芯片16/32位微控制器；32/64/128/256/512 kB ISP/IAP flash，帶10位ADC和DAC; 2.1 Enhancements brought by LPC213x/01 devices\n? Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original LPC213x. They also allow for a port pin to be read at any time regardless of its function.\n? Dedicated result registers for ADC(s) reduce interrupt overhead.\n? UART0/1 include fractional baud rate generator, auto-bauding capabilities and handshake flow-control fully implemented in hardware.\n? Additional BOD control enables further reduction of power consumption.\n2.2 Key features common for LPC213x and LPC213x/01\n? 16/32-bit Arm7TDMI-S? microcontroller in a tiny LQFP64 or HVQFN64 package.\n? 8/16/32 kB of on-chip static RAM and 32/64/128/256/512 kB of on-chip flash program memory. 128-bit wide interface/accelerator enables high-speed 60 MHz operation.\n? In-System Programming/In-Application Programming (ISP/IAP) via on-chip bootloader software. Single flash sector or full chip erase in 400 ms and programming of 256 B in 1 ms.\n? EmbeddedICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software and high-speed tracing of instruction execution.\n? One (LPC2131/32) or two (LPC2134/36/38) 8-channel 10-bit ADCs provide a total of up to 16 analog inputs, with conversion times as low as 2.44 μs per channel.\n? Single 10-bit DAC provides variable analog output (LPC2132/34/36/38).\n? Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit (six outputs) and watchdog.\n? Low power Real-time clock with independent power and dedicated 32 kHz clock input.\n? Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with buffering and variable data length capabilities.\n? Vectored interrupt controller with configurable priorities and vector addresses.\n? Up to forty-seven 5 V tolerant general purpose I/O pins in tiny LQFP64 or HVQFN package.\n? Up to nine edge or level sensitive external interrupt pins available.\n? 60 MHz maximum CPU clock available from programmable on-chip PLL with settling time of 100 μs.\n? On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz and with external oscillator up to 50 MHz.\n? Power saving modes include Idle and Power-down.\n? Individual enable/disable of peripheral functions as well as peripheral clock scaling down for additional power optimization.\n? Processor wake-up from Power-down mode via external interrupt or BOD.\n? Single power supply chip with POR and BOD circuits: ? CPU operating voltage range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.\n;

The LPC2131/32/34/36/38 microcontrollers are based on a 16/32-bit Arm7TDMI-S? CPU with real-time emulation and embedded trace support, that combine the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.\nDue to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options of 8 kB, 16 kB, and 32 kB, they are very well suited for communication gateways and protocol converters, soft modems, voice recognition and low-end imaging, providing both large buffer size and high processing power. Various 32-bit timers, single or dual 10-bit 8-channel ADC(s), 10-bit DAC, PWM channels and 47 GPIO lines with up to nine edge or level sensitive external interrupt pins make these microcontrollers particularly suitable for industrial control and medical systems.\n

ETC

LPC2138FHN64

單芯片16/32位微控制器；32/64/128/256/512 kB ISP/IAP flash，帶10位ADC和DAC; 2.1 LPC213x/01器件帶來的增強功能 \n快速GPIO端口使端口引腳能夠以高達原始LPC213x 3.5倍的速度切換。這些端口還允許隨時讀取端口引腳，無論其功能如何。\n ADC的專用結果寄存器可減少中斷開銷。\n UART0/1包括小數波特率生成器、自動波特率功能以及在硬件中完全實施的信號交換流控制。\n 額外的BOD控制可進一步降低功耗。\n2.2 LPC213x和LPC213x/01的共同主要 \n16/32位Arm7TDMI-S?微控制器，采用超小型LQFP64或HVQFN64封裝。\n 8/16/32 kB片上靜態RAM和32/64/128/256/512 kB片上閃存程序存儲器。128位寬接口/加速器實現高速的60 MHz操作。\n 通過片上啟動引導程序軟件執行在系統編程/在應用編程(ISP/IAP)。400 ms內執行單flash扇區或全芯片擦除，1 ms內編程256 B。\n EmbeddedICE RT和嵌入式跟蹤接口通過片內RealMonitor軟件提供即時調試，并對指令的執行進行高速跟蹤。\n 一個(LPC2131/32)或兩個(LPC2134/36/38) 8通道10位ADC總共提供最多16個模擬輸入，轉換時間低至每通道2.44 μs。\n 單個10位DAC提供可變的模擬輸出(LPC2132/34/36/38)。\n 兩個32位定時器/外部事件計數器(每個帶4個捕獲通道和4個比較通道)、PWM單元(6個輸出)和看門狗。\n 低功耗實時時鐘，帶獨立電源和專用32 kHz時鐘輸入。\n 多個串行接口，包括兩個UART (16C550)、兩個快速I2C總線(400 kbit/s)、SPI和SSP，帶緩沖和可變數據長度功能。\n 矢量中斷控制器帶可配置優先級和矢量地址。\n 最多47個5 V耐壓通用I/O引腳，采用超小型LQFP64或HVQFN封裝。\n 提供多達9個邊沿或電平觸發的外部中斷引腳。\n 可編程的片上PLL提供最高60 MHz CPU時鐘，建立時間為100 μs。\n 片上集成式振蕩器在有外部晶體時的操作范圍為1 MHz到30 MHz，有外部振蕩器時高達50 MHz。\n 省電模式包括空閑模式和掉電模式。\n 外設功能的單獨使能/禁用以及外設時鐘調整可額外進行功率優化。\n 處理器通過外部中斷或BOD從掉電模式喚醒。\n 帶POR和BOD電路的單電源芯片：CPU工作電壓范圍為3.0 V到3.6 V (3.3 V ± 10 %)，I/O 5 V耐壓。\n\n;

LPC2131/32/34/36/38微控制器基于16位/32位Arm7TDMI-S?CPU，支持實時仿真和嵌入式跟蹤，將該微控制器與32 kB、64 kB、128 kB、256 kB和512 kB的嵌入式高速Flash存儲器相結合。128位存儲器接口和獨特的加速架構使得32位代碼可在最高時鐘速率下執行。對代碼大小要求嚴格的應用程序，可選用的16位Thumb模式以最小的性能損失換取超過30%的代碼壓縮。\n 由于尺寸小，功耗低，對于小型化是一項關鍵要求的應用（如門禁控制和銷售點），這些微控制器是理想之選。它們具有各種串行通信接口及8 kB、16 kB和32 kB的片上SRAM選項，非常適合于通信網關和協議轉換器、軟調制解調器、語言識別和低端成像，提供大緩沖尺寸和高處理能力兩大優勢。多個32位定時器、單/雙10位8通道ADC、10位DAC、PWM通道、47個GPIO線，它們擁有多達9個邊沿或電平觸發的外部中斷引腳，以上特性使得這些微控制器尤其適用于工業控制和醫療系統領域。\n

ETC

LPC2138/01

NXP Microcontrollers Selection Guide

ETC

LPC2138-01

ARM7-based microcontrollers with two 10-bit ADCs and 10-bit DAC

ETC

LPC2138SLASH01

NXP Microcontrollers Selection Guide

ETC