1 Features

? Operating voltage VCC range: 2.5V to 5.5V

? SPI peripheral

– Data transfer rate up to 20MHz

– Support multiple peripherals with one controller

? Continuous Clock Serial Interface (CCSI)

Controller and Peripheral

– Data transfer rate up to 20MHz

– Programmable clock jitter for EMI enhancement

? Diagnostics

– Open-drain FAULT pin

– SPI communication loss detection

– CRC for SPI communication

– CCSI data integrity

? Data ready interrupt for availability of data

2 Applications

? SPI compatible connectivity for LP5890 and

LP5891

3 Description

The LP5899 SPI-compatible connectivity enables

LP589x device family to be controlled using a

standard SPI controller. The device features an

internal oscillator to generate the continuous clock

required by the LP589x device family. Jitter can be

added to the continuous clock for EMI enhancement.

The transmitted data is aligned to the continuous

clock to maintain the timing requirements of the CCSI

interface.

LP5899 incorporates reporting of faults in both the

LP589x daisy chain and LP5899 internal. Data

transmission of register and VSYNC commands to

the LP589x daisy chain is CRC protected by LP5899.

In addition, the data line is guarded by LP5899 for

stuck-at faults.