描述 Description

The LP2950 and LP2951 are micropower low dropout (LDO) linear voltage regulators that are specifically designed to maintain proper regulation with an extremely low input-to-output voltage differential. These devices feature a very low quiescent bias current of 75 μA and are capable of supplying output currents in excess of 100 mA. Internal current and thermal limiting protection is provided.The LP2951 LDO linear voltage regulator has three additional features. The first is the Errorbar Output that can be used to signal external circuitry of an out of regulation condition, or as a microprocessor power-on reset. The second feature allows the output voltage to be preset to 5.0 V, 3.3 V or 3.0 V output (depending on the version) or programmed from 1.25 V to 29 V. It consists of a pinned out resistor divider along with direct access to the Error Amplifier feedback input. The third feature is a Shutdown input that allows a logic level signal to turn-off or turn-on the regulator output. Due to the low input-to-output voltage differential and bias current specifications, these devices are ideally suited for battery powered computer, consumer, and industrial equipment where an extension ofuseful battery life is desirable. The LP2950 is available in the three pin case 29 and DPAK packages, and the LP2951 is available in the eight pin dual-in-line, SO-8 and Micro-8 surface mount packages.The 'A' suffix devices feature an initial output voltage tolerance +/-0.5%.

特性 Features

? Wide Input Range: Up to 30 V
? Enables use with 24V rail
? Rated Output Current of 100 mA
? Sufficient power capability for MCU
? Low Dropout 50 mV at 100 mA and 380 mV at 100 mA
? Lower thermal impact than Vreg
? Low Quiescent Current: 75 μA (Typ)
? Longer battery life
? Requires Only a 1.0 mF Output Capacitor for Stability
? Small size, low cost system
? Internal Current and Thermal Limiting
? Built-in protection features
? LP2951 also has Error(bar) Output Signals an Out of Regulation Condition
? Enhanced protection capability
? LP2951 also has Output Programmable from 1.25 V to 29 V
? Flexibility for various end product applications
? LP2951 also has Logic Level Shutdown Input
? Enhanced protection capability
? Extremely Tight Line and Load Regulation
? Accurate system level design capability
? 5.0 V, 3.3 V or 3.0 V +/- 0.5%
? Allows Use as a Regulator or Reference

應用 Application

? Automotive
? Avionics: RADAR
? AC Analog Input Module
? Logistics Robot CPU Board
? Optical Line Card

簡介

LP2951屬于集成電路（IC）的穩壓器-線性。由制造生產的LP2951穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。