1 Features

? Qualified for JEDEC JEP180 for hard-switching

topologies

? 600V GaN-on-Si FET with integrated gate driver

– Integrated high precision gate bias voltage

– 200V/ns FET hold-off

– 3.6MHz switching frequency

– 20V/ns to 150V/ns slew rate for optimization of

switching performance and EMI mitigation

– Operates from 7.5V to 18V supply

? Robust protection

– Cycle-by-cycle overcurrent and latched shortcircuit

protection with < 100ns response

– Withstands 720V surge while hard-switching

– Self-protection from internal overtemperature

and UVLO monitoring

? Advanced power management

– Digital temperature PWM output

– LMG3426R050 includes zero-voltage detection

(ZVD) feature that facilitates soft-switching

converters

2 Applications

? Switch-mode power converters

? Merchant network and server PSU

? Merchant telecom rectifiers

? Solar inverters and industrial motor drives

? Uninterruptible power supplies

3 Description

The LMG342xR050 GaN FET with integrated driver

and protection is targeted at switch-mode power

converters and enables designers to achieve new

levels of power density and efficiency.

The LMG342xR050 integrates a silicon driver that

enables switching speed up to 150V/ns. TI’s

integrated precision gate bias results in higher

switching SOA compared to discrete silicon gate

drivers. This integration, combined with TI's lowinductance

package, delivers clean switching and

minimal ringing in hard-switching power supply

topologies. Adjustable gate drive strength allows

control of the slew rate from 20V/ns to 150V/ns,

which can be used to actively control EMI and

optimize switching performance. The LMG3426R050

includes the zero-voltage detection (ZVD) feature

which provides a pulse output from the ZVD pin when

zero-voltage switching is realized.

Advanced power management features include

digital temperature reporting and fault detection.

The temperature of the GaN FET is reported

through a variable duty cycle PWM output, which

simplifies managing device loading. Faults reported

include overcurrent, short-circuit, overtemperature,

VDD UVLO, and high-impedance RDRV pin.