LM9070屬于集成電路（IC）的線性+開關穩壓器。由美國德州儀器公司制造生產的LM9070穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

1FEATURES

2? Automotive Application Reliability

? 3% Output Voltage Tolerance

? Insensitive to Radiated RFI

? Dropout Voltage Less than 800 mV with 250

mA Output Current

? Externally Programmed Reset Delay Interval

? Keep-Alive Feature with 2 Logic Control Inputs

? 60V Load Dump Transient Protection

? Thermal Shutdown

? Short Circuit Protection and Disable Safety

特性 Features

? Reverse Battery Protection

? Low OFF Quiescent Current, 50 μA Maximum

? Wide Operating Temperature Range ?40°C to

+125°C

? TO-263 and 20-Pin Power Surface Mount

Packages

? Lead Form Compatible with TLE4267 TO-220

Regulator

DESCRIPTION

The LM9070 is a 5V, 3% accurate, 250 mA low-

dropout voltage regulator. The regulator features an

active low delayed reset output flag which can be

used to reset a microprocessor system on turn-ON

and in the event that the regulator output falls out of

regulation for any reason. An external capacitor

programs a delay time interval before the reset output

can return high.

Designed for automotive application the LM9070

contains a variety of protection features such as

reverse battery, over-voltage shutdown, thermal

shutdown, input transient protection and a wide

operating temperature range.

A unique two-input logic control scheme is used to

enable or disable the regulator output. An ON/OFF

input can be provided by an ignition switch derived

signal while a second, Keep-Alive input, is generated

by a system controller. This allows for a system to

remain ON after ignition has been switched OFF. The

system controller can then execute a power-down

routine and after which command the regulator OFF

to a low quiescent current state (60 μA max).

Design techniques have been employed to allow the

regulator to remain operational and not generate false

reset signals when subjected to high levels of RF

energy (300V/m from 2 MHz to 400 MHz).