最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

LM4810

具有數字音量控制和關斷模式的 105mW 立體聲、模擬輸入耳機放大器; ? Active-High Shutdown Mode\n? WSON, VSSOP, and SOIC Surface Mount Packaging\n? \"Click and Pop\" Suppression Circuitry\n? Low Shutdown Current \n? No Bootstrap Capacitors Required\n? Unity-Gain Stable\n Key Specifications \n? THD+N at 1kHz, 105mW Continuous Average Power into 16? 0.1 % (typ)\n? THD+N at 1kHz, 70mW Continuous Average Power into 32? 0.1 % (typ)\n? Shutdown Current 0.4 μA (typ);

The LM4810 is a dual audio power amplifier capable of delivering 105mW per channel of continuous average power into a 16? load with 0.1% (THD+N) from a 5V power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. Since the LM4810 does not require bootstrap capacitors or snubber networks, it is optimally suited for low-power portable systems. The unity-gain stable LM4810 can be configured by external gain-setting resistors. The LM4810 features an externally controlled, active-high, micropower consumption shutdown mode, as well as an internal thermal shutdown protection mechanism.

LM4810

Dual 105mW Headphone Amplifier with Active-High Shutdown Mode

LM4810

Dual 105mW Headphone Amplifier with Active-High Shutdown Mode

LM48100Q-Q1

具有輸出故障檢測的 1.3W 單聲道、模擬輸入 AB 類音頻放大器; ? Output Fault Detection\n? I2C Volume and Mode Control\n? Input Mixer and Multiplexer\n? High PSRR\n? Individual 32-Step Volume Control\n? Short Circuit and Thermal Protection\n? Advanced Click-and-Pop Suppression\n? Low-Power Shutdown Mode\n? Available in 14-Pin HTSSOP Package\n? Key Specifications: \n? Output Power at VDD = 5 V, RL = 8 Ω, THD+N ≤ 1% 1.3 W (Typical)\n? Quiescent Power Supply Current at 5 V, 6 mA (Typical)\n? PSRR at 1 kHz 74 dB (Typical)\n? Shutdown current 0.01 μA (Typical);

The LM48100Q-Q1 is a single supply, mono, bridge-tied load amplifier with I2C volume control, ideal for automotive applications. A comprehensive output fault detection system senses the load conditions, protecting the device during short circuit events, as well as detecting open circuit conditions.Operating from a single 5-V supply, the LM48100Q-Q1 delivers 1.3 W of continuous output power to an 8 Ω load with < 1% THD+N. Flexible power supply requirements allow operation from 3 V to 5.5 V. High power supply rejection ratio (PSRR), 74 dB at 1 kHz, allows the device to operate in noisy environments without additional power supply conditioning.The LM48100Q-Q1 features dual audio inputs that can be mixed/multiplexed to the device output. Each input path has its own independent, 32-step volume control. The mixer, volume control and device mode select are controlled through an I2C compatible interface. An open drain FAULT output indicates when a fault has occurred. Comprehensive output short circuit and thermal overload protection prevent the device from being damaged during a fault condition.A low power shutdown mode reduces supply current consumption to 0.01 μA. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. The LM48100Q-Q1 is available in an 14-pin HTSSOP PowerPAD? IC package.

LM4810_15

Dual 105mW Headphone Amplifier with Active-High Shutdown Mode

LM48100Q

Mono, 1.3W Audio Power Amplifier with Output Fault Detection and Volume Control

LM48100Q

LM48100Q Boomer Mono, 1.3W Audio Power Amplifier with Output Fault Detection and Volume Control

LM48100Q

Mono, 1.3W Audio Power Amplifier with Output Fault Detection and Volume Control;

LM48100QMH

Mono, 1.3W Audio Power Amplifier with Output Fault Detection and Volume Control

LM48100QMH

Audio Power Amplifier