LM317MKTPR屬于集成電路（IC）的線性+開關穩壓器。由美國德州儀器公司制造生產的LM317MKTPR穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

1 Features

1? Output Voltage Range Adjustable

from 1.25-V to 37-V

? Output Current Greater Than 500-mA

? Internal Short-Circuit Current Limiting

? Thermal-Overload Protection

? Output Safe-Area Compensation

? Q Devices Meet Automotive Performance

Requirements

? Customer-Specific Configuration Control Can Be

Supported for Q Devices Along With

Major-Change Approval

2 Applications

? Electronic Point-of-Sales

? Medical/Health/Fitness Applications

? Printers

? Appliances/White Goods

? TV/Set-Top Box

3 Description

The LM317M is an adjustable 3-terminal positive

voltage regulator capable of supplying more than

500-mA over an output-voltage range of 1.25-V to

37-V. The LM317M is exceptionally easy to use and

requires only two external resistors to set the output.

Furthermore, both line and load regulation are better

than standard fixed regulators.

In addition to having higher performance than fixed

regulators, the LM317M includes on-chip current

limiting, thermal-overload protection, and safe-

operating-area protection. All overload protection

remains fully functional if the ADJUST terminal is

disconnected.

The LM317 is a floating regulator meaning there is no device ground terminal. Quiescent current flows to

the load instead of being wasted flowing to ground.

Regulated output voltage of hundreds of volts is

possible if the maximum input to output differential does not exceed 40-V at any time. Device can be

used as a floating current source controlled by a

single resistor.

Normally, no capacitors are needed unless the device

is more than six inches from the input filter

capacitors, in which case an input bypass capacitor

of any type is needed. An optional electrolytic or

tantalum output capacitor can be added to improve

transient response. Ceramic output capacitors can be

used but output ringing may be present on transients.

The ADJUST terminal can be bypassed with any type

of capacitor to achieve high ripple-rejection ratios,

which are difficult to achieve with standard threeterminal

regulators.