LM26CIM5-YHA/NOPB屬于傳感器變送器的溫度傳感器-溫控器-固態。由美國德州儀器公司制造生產的LM26CIM5-YHA/NOPB溫度傳感器 - 溫控器 - 固態固態溫控器產品是基于半導體的溫度檢測器件，具有雙態輸出，當測量溫度超出固定界限或定義范圍時，輸出狀態會相應地發生變化。此類產品包括提供預設溫度閾值和可編程/可配置閾值的器件。

1 Features

1? Internal Comparator With Pin Programmable 2°C

or 10°C Hysteresis

? No External Components Required

? Open-Drain or Push-Pull Digital Output; Supports

CMOS Logic Levels

? Internal Temperature Sensor With VTEMP Output

Pin

? VTEMP Output Allows After-Assembly System

Testing

? Internal Voltage Reference and DAC for Trip-Point

Setting

? Currently Available in 5-pin SOT-23 Plastic

Package

? Excellent Power Supply Noise Rejection

? UL Recognized Component

? Key Specifications

– Power Supply Voltage 2.7 V to 5.5 V

– Power Supply Current

40 μA (Maximum) 16 μA (Typical)

– Hysteresis Temperature 2°C or 10°C (Typical)

2 Applications

? Microprocessor Thermal Management

? Appliances

? Portable Battery Powered Systems

? Fan Control

? Industrial Process Control

? HVAC Systems

? Remote Temperature Sensing

? Electronic System Protection

3 Description

The LM26 is a precision, single digital-output, low-

power thermostat comprised of an internal reference,

DAC, temperature sensor and comparator. Utilizing

factory programming, it can be manufactured with

different trip points as well as different digital output

functionality. The trip point (TOS) can be preset at the

factory to any temperature in the range of ?55°C to

110°C in 1°C increments. The LM26 has one digital output (OS/OS/US/US), one digital input (HYST) and

one analog output (VTEMP). The digital output stage

can be preset as either open-drain or push-pull. In

addition, it can be factory programmed to be active

HIGH or LOW. The digital output can be factory

programmed to indicate an over temperature

shutdown event (OS or OS) or an under temperature shutdown event (US or US). When preset as an

overtemperature shutdown (OS) it will go LOW to

indicate that the die temperature is over the internally

preset TOS and go HIGH when the temperature goes below (TOS–THYST). Similarly, when preprogrammed

as an undertemperature shutdown (US) it will go

HIGH to indicate that the temperature is below TUS

and go LOW when the temperature is above

(TUS+THYST). The typical hysteresis, THYST, can be set to 2°C or 10°C and is controlled by the state of the

HYST pin. A VTEMP analog output provides a voltage

that is proportional to temperature and has a ?10.82

mV/°C output slope.

Available parts are detailed in the Device Comparison

Table. For other part options, contact a Texas

Instruments Distributor or Sales Representative for information on minimum order qualification. The

LM26 is currently available in a 5-lead SOT-23

package.