1 Features

1? Qualified for Automotive Applications

? AEC-Q100 Qualified With the Following Results:

– Device Temperature Grade 1: –40°C to

+125°C Ambient Operating Temperature

? Integrated 42-V, 750-mΩ N-Channel MOSFET

? Ultra-Wide Input Voltage From 6 V to 42 V

? Adjustable Output Voltage as Low as 1.225 V

? 1.5% Feedback Reference Accuracy

? Operating Frequency Adjustable Between 50 kHz

and 1 MHz With Single Resistor

? Master or Slave Frequency Synchronization

? Adjustable Soft-Start

? Emulated Current Mode Control Architecture

? Wide Bandwidth Error Amplifier

? Built-In Protection

? TSSOP-16 Package

? Create a Custom Design Using the LM25574-Q1

With the WEBENCH? Power Designer

2 Applications

? Industrial

3 Description

The LM25574-Q1 is an easy to use buck regulator

which allows design engineers to design and optimize

a robust power supply using a minimum set of

components. Operating with an input voltage range of

6 V to 42 V, the LM25574-Q1 delivers 0.5-A of

continuous output current with an integrated 750-mΩ

N-Channel MOSFET. The regulator utilizes an

Emulated Current Mode architecture which provides

inherent line regulation, tight load transient response,

and ease of loop compensation without the usual

limitation of low-duty cycles associated with current

mode regulators. The operating frequency is

adjustable from 50 kHz to 1-MHz to allow

optimization of size and efficiency. To reduce EMI, a

frequency synchronization pin allows multiple IC’s

from the LM(2)557x family to self-synchronize or to

synchronize to an external clock. The LM25574-Q1

guarantees robustness with cycle-by-cycle current

limit, short-circuit protection, thermal shut-down, and

remote shut-down. The device is available in a

TSSOP-16 package.