LM10011屬于集成電路（IC）的特殊用途穩壓器。由美國德州儀器公司制造生產的LM10011特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。

1 Features

1? 1.0% Output Current Accuracy (0°C to 100°C)

? 1.25% Output Current Accuracy (–40°C to 125°C)

? Input Voltage Range: 2.97 V to 5.5 V

? Pin Selectable VID Format (6- or 4-bit)

? 16 Selectable Start-Up Currents

? Precision Enable to Support Custom UVLO

? SON-10 3-mm × 3-mm Footprint, 0.5-mm Pitch

? Footprint Compatible with the LM10010

2 Applications

? Broadband, Networking, and Wireless

Communications

? Notebook Power Solutions

? Portable Instruments

? Battery-Powered Equipment

? Powering Digital Loads with a 6-bit or 4-bit, 4-Pin

VID Interface

3 Description

The LM10011 is a precision, digitally programmable

device used to control the output voltage of a DC/DC converter. The LM10011 outputs a dc current

proportional to a 6-bit or 4-bit input word. By

connecting the IDAC_OUT pin to the feedback node

of a regulator, the regulator output voltage can be adjusted to a desired range and resolution set by the

user. As the input word counts up, the output voltage

is adjusted higher based on the values of the

feedback resistors in the converter.

The current from the IDAC_OUT pin on start-up is

programmable by an external resistor to cover the

range of 0 to 56.4 μA with 4 bits of resolution. The

MODE pin allows programming of the device through a 4-bit parallel VID interface or through a 6-bit

interface consisting of upper and lower 3-bit VID

codes. The LM10011 is specifically designed to

program a wide variety of Texas Instruments DC/DC

converters for VID (Voltage Identification)

applications.