描述 Description

The LD1085 is a low drop voltage regulator able to provide up to 3 A of output current. Dropout is guaranteed at a maximum of 1.2 V at the maximum output current, decreasing at lower loads. The LD1085 is pin-to-pin compatible with the older 3-terminal adjustable regulators, but offers better performance in terms of drop and output tolerance.

Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1085 quiescent current flows into the load, thus increase efficiency. Only a 10 μF minimum capacitor is need for stability.

The device is supplied in TO-220, TO-220FP, D2PAK and D2PAK/A packages. On-chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1% at 25 °C.

特性 Features

? Typical dropout 1.3 V (at 3 A)
? Three terminal adjustable or fixed output voltage 1.8 V, 2.5 V, 3.3 V, 5 V
? Guaranteed output current up to 3 A
? Output tolerance ± 1% at 25 °C and ± 2% in full temperature range
? Internal power and thermal limit
? Wide operating temperature range -40 °C to 125 °C
? Package available: TO-220, TO-220FP, D2PAK, D2PAK/A
? Pinout compatibility with standard adjustable VREG

簡介

LD1085屬于集成電路（IC）的線性+開關穩壓器。由制造生產的LD1085穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。