描述 Description

This device has been designed to protect 2 new high voltage, as well as classical SLICs against transient overvoltages.
Positive overvoltages are clamped by 2 diodes. Negative surges are suppressed by 2 thyristors, their breakdown voltage being referenced to -VBATthrough the gate.
This component presents a very low gate triggering current (IGT) to reduce the current consumption on printed circuit boards during the firing phase.

特性 Features

? dual-line programmable transient voltage suppressor
? wide negative firing voltage range
? VMGL= -150 V max.
? low dynamic switching voltages: VFPand VDGL
? low gate triggering current: IGT= 5 mA max.
? peak pulse current: IPP= 20 A (10/1000 μs)
? holding current: IH= 150 mA min.
? Benefits
? A Trisil? is not subject to ageing and provides a fail safe mode in short circuit for better protection.
? Trisils are used to help equipment meet various standards such as UL1950, IEC 950 / CSA C22.2, UL1459 and FCC part68.
? Trisils have UL94 V0 approved resin.
? Trisils are UL497B approved (file: E136224).

簡介

LCDP1521屬于電路保護的TVS-晶閘管。由制造生產的LCDP1521TVS - 晶閘管基于晶閘管的瞬態電壓抑制 (TVS) 器件可用于提供過壓保護，在正常工作條件下近似于開路。在這些器件兩端施加超過某個特定值的電壓（稱為擊穿電壓），可使它們進入近似于短路的導通狀態。?這種狀態一直持續至流過器件的電流因電路中的一些外部影響而降低到稱為“保持電流”的最小值以下。