描述 Description

The LAN9250 is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance,flexibility, ease of integration and system cost control are required. The LAN9250 has been specifically designed to provide high performance and throughput for 16-bit applications. The LAN9250 complies with the IEEE802.3 (full/half-duplex 10BASE-T and 100BASE-TX) Ethernet protocol, IEEE 802.3az Energy Efficient Ethernet (EEE)(100Mbps only), and the IEEE 1588v2 precision time protocol. 100BASE-FX is supported via an external fiber transceiver.



The LAN9250 includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. For additional design flexibility SPI and SQI interfaces are also supported. The integrated checksum offload engines enable the automatic generation of the 16-bit checksum for received and transmitted Ethernet frames, offloading the task from the CPU. The LAN9250 also includes large transmit and receive data FIFOs to accommodate high latency applications. In addition, the LAN9250 memory buffer architecture allows highly efficient use of memory resources by optimizing packet granularity. The LAN9250 also supports features which reduce or eliminate packet loss. The internal 16-KByte SRAM can hold over 200 received packets. If the receive FIFO gets too full, the LAN9250 can automatically generate flow control packets to the remote node, or assert back-pressure on the remote node by generating network collisions.



The LAN9250 can be configured to operate via a single 3.3V supply utilizing an integrated 3.3V to 1.2V linear regulator.The linear regulator may be optionally disabled, allowing usage of a high efficiency external regulator for lower system power dissipation



Microchip's complimentary and confidential LANCheck? online design review services are available for customers who have selected our products for their application design-in*.



*The?LANCheck online design review?service?is subject to?Microchip's?Program Terms and Conditions?and requires a myMicrochip?account.

特性 Features

? 16-bit 10/100 industrial Ethernet controller & PHY
? Interfaces to most 8/16-bit embedded controllers
? Also 32-bit embedded controllers with an 8/16-bit bus
? Also supports SPI/SQI?
? Integrated Ethernet PHY with HP Auto-MDIX
? Integrated Ethernet MAC
? Compliant with Energy Efficient Ethernet 802.3az
? Wake on LAN (WoL) support
? Integrated IEEE 1588v2 hardware time stamp unit
? Cable diagnostic support
? 1.8V to 3.3V variable voltage I/O
? Integrated 1.2V regulator for single 3.3V operation
? Low pin count and small body size package

簡介

LAN9250屬于集成電路（IC）的控制器。由制造生產的LAN9250控制器該系列產品主要用于在采用不同通信協議和/或信令方法的端點之間提供信息連接。示例包括將 I2C 總線連接到 UART，將 USB 連接到 I2C、SPI、以太網或 UART、以太網 MAC 和 PHY 等的器件。此外，還包括用于通過為點對點通信設計的接口建立多路連接的器件，例如 USB 集線器控制器。