GENERAL DESCRIPTION

The LAN91C95 is a VLSI Ethernet Controller that combines ISA and PCMCIA interfaces, as well as an interface to a companion modem chip set, in one chip. The LAN91C95 integrates all the MAC and physical layer functions as well as the packet RAM needed to implement a high performance 10BASE-T (twisted pair) node. For 10BASE5 (thick coax), 10BASE2 (thin coax), and 10BASE-F (fiber) implementations, the LAN91C95 interfaces to external transceivers via its AUI port. Only one additional IC is required on most applications.

FEATURES

? ISA/PCMCIA Single Chip Ethernet Controller With Modem Support

? 6 Kbytes Built-In RAM

? Supports IEEE 802.3 (ANSI 8802-3) Ethernet Standards

? Full Duplex Support

? Hardware Memory Management Unit

? Built-In AUI and 10BASE-T Network Interfaces

? SimultaskingJ - Early Transmit and Early Receive Functions

? Advanced Power Management Features/Including Magic Packet Frame Control

? Software Compatible with LAN91C92/ LAN91C94 (in ISA Mode)

? Configuration Registers Implement Cardbus Multi-Function Specification V3.0 with Backward Compatibility to V2.1

? Interfaces Directly to Lucent Technologies and Conexant (formerly Rockwell) Modem Chipsets

? On-Chip Attribute Memory (CIS) of up to 512 Bytes (On Even Addresses) For Card Configuration Information; Expandable Externally

? Option for Serial or Parallel EEPROM for CIS

? Optional External Flash Capability for XIP (Execute in Place)

? Automatic Technology to Detect 10 BASE-T TX/RX Polarity Reversal

? Low Power CMOS Design

? Supports Magic Packet Wakeup

? 128 Pin TQFP Package